The effect of mismatch in current- versus voltage-mode resistive grids

✍ Scribed by Bertram E. Shi

• Publisher: John Wiley and Sons
• Year: 2009
• Tongue: English
• Weight: 235 KB
• Volume: 37
• Category: Article
• ISSN: 0098-9886
• DOI: 10.1002/cta.494

✦ Synopsis

Abstract

Resistive grids are commonly used in neuromorphic very large‐scale integration (VLSI) designs for image smoothing and signal aggregation. Because mismatch is inevitable in VLSI chips, one reason that resistive grids are attractive is that their output is robust to mismatch in the component values. Here, we examine relative sensitivity of different resistive grid designs that differ depending upon whether the input and output are represented by current or voltage. Our analysis reveals that a mixed‐mode design, where the input is represented by current but the output is represented by voltage, is less sensitive to mismatch when the amount of smoothing is large. On the other hand, when little smoothing is desired, pure voltage‐mode and current‐mode designs are preferred. From the point of view of mismatch sensitivity, there is little difference between the two pure‐mode designs. Our analysis also reveals that the difference in mismatch sensitivity is due to the vertical resistors, which are the most sensitive to mismatch in all the three designs studied. Copyright © 2008 John Wiley & Sons, Ltd.