✦ LIBER ✦

The effect of loading pattern on the growth rate of a stress corrosion crack at high stress levels

✍ Scribed by E. Smith

Publisher: Elsevier Science
Year: 1984
Weight: 577 KB
Volume: 62
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(84)90265-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The transition between stress corrosion

The transition between stress corrosion crack growth and plastic fracture—II. The effect of loading pattern

✍ E. Smith 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 556 KB

&a&a&--The paper addresses the problem of predicting the onset of plastic fracture at the tip of a growing stress corrosion crack, using data from laboratory fracture mechanics tests, A theoretical analysis for a particular model: namely that of the plane strain deformation of a solid with two symme

The effect of stress ratio on fatigue cr

The effect of stress ratio on fatigue crack growth rates in steels

✍ O. Vosikovsky 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 620 KB

Ab&W-The effects of stress ratio on fatigue crack growth thresholds and low and intermediate fatigue crack growth r8tes are ex8mined on steels with ferri+pearlii and tempered martensite micros~c~s, tested in air. The analysis of available experimental data shows that simple empirical relationships c

An ambiguity of the cathodic polarizatio

An ambiguity of the cathodic polarization effect on crack growth during stress corrosion cracking of aluminum alloys

✍ V. A. Marichev 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 German ⚖ 652 KB

## Abstract The kinetics of crack growth under the conditions of stress corrosion cracking of aluminum alloys in electrolytes with different anion composition and pH values from 0 to 13 has been studied. It is shown that for the majority of alloy‐electrolyte systems anodic polarization accelerates

Anion effects on the stress corrosion cr

Anion effects on the stress corrosion cracking behaviour of aluminium alloys

✍ R. Braun 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 German ⚖ 789 KB

The stress corrosion cracking behaviour of plate material of the aluminium alloys 2024-T351, 8090-T8171, 7475-T651, and 7075-T7351 was investigated performing constant load tests. Short transverse tensile specimens were permanently immersed in aerated aqueous 0.6 M Na 2 Cl solutions with additions o

Effects of Loading Waveform and Stress F

Effects of Loading Waveform and Stress Field on High Temperature Fatigue Crack Growth of Alloy 718

✍ P. Heuler; E. Affeldt; R.J.H. Wanhill 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 325 KB

## Abstract High temperature fatigue in nickel‐base superalloys for aero‐engine applications requires consideration of cycle‐ and time‐dependent phenomena. For waveforms with dwells and/or low frequencies crack growth rates may be significantly accelerated up to the point of fully time‐dependent cr

On loading mode (I, III) technique as a

On loading mode (I, III) technique as a means of determination of crack growth mechanism in Stress-corrosion cracking

✍ Prof. V. A. Marichev 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 German ⚖ 627 KB

This paper represents a critical review of the loading Mode 1 (tension) and Mode 111 (torsion) technique as a means of determining the role of hydrogen embrittlement in crack growth during stress-corrosion cracking of structural materials. An account is given of the mechanical and electrochemical as