✦ LIBER ✦

The effect of load ratio on fatigue crack growth in Ti-8Al-1Mo-1V

✍ Scribed by G.R. Yoder; L.A. Cooley; T.W. Crooker

Publisher: Elsevier Science
Year: 1983
Tongue: English
Weight: 264 KB
Volume: 17
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(83)90168-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Quantitative analysis of microstructural

Quantitative analysis of microstructural effects on fatigue crack growth in widmanstätten Ti-6A1-4V and Ti-8Al-1Mo-1V

✍ G.R. Yoder; L.A. Cooley; T.W. Crooker 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 652 KB

Analysis of fattgue crack growth behavior of five beta-annealed alloys indicates significant effects of mlcrostructure upon the logarithmic plot of fatigue crack growth rate (da/dN) vs stress-intensity range (AK). Each plot exhibits a bilinear form with a transition at AKr, the position of which lie

The effects of load ratio on environment

The effects of load ratio on environmentally assisted fatigue crack growth

✍ True-Hwa Shih; R.P. Wei 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 993 KB

A modification to the model of Weir ef al. for surface reaction and transport controlled fatigue crack growth has been developed to explicitly account for the effect of load ratio on environmentally assisted fatigue crack growth. Load ratio was found to affect principalfy gas transport to the crack

The effect of load ratio on the threshol

The effect of load ratio on the threshold stresses for fatigue crack growth in medium carbon steels

✍ R.J. Cooke; C.J. Beevers 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 821 KB

A study of the effect of load ratio, R, on the low crack growth rates and the threshold stress conditions exhibited by five medium carbon steels has been conducted. It was found that decreased values of R retarded crack growth to an increasing degree as a defined threshold for crack growth was appro

The effect of stress ratio on fatigue cr

The effect of stress ratio on fatigue crack growth rates in steels

✍ O. Vosikovsky 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 620 KB

Ab&W-The effects of stress ratio on fatigue crack growth thresholds and low and intermediate fatigue crack growth r8tes are ex8mined on steels with ferri+pearlii and tempered martensite micros~c~s, tested in air. The analysis of available experimental data shows that simple empirical relationships c

Effect of hold time and environment on F

Effect of hold time and environment on Fatigue Crack Growth Rate in Ti Alloys

✍ Dr. D. Munz; V. Bachmann 📂 Article 📅 1980 🏛 John Wiley and Sons 🌐 English ⚖ 491 KB

## Abstract In titanium alloys an effect of hold time at maximum load in a cyclic test is observed if K~max~ exceeds the threshold for crack propagation at a constant load test. For tests in air it is possible to predict crack growth rate for a hold time cycle from the crack growth rates from a cyc

J-integral in the description of fatigue

J-integral in the description of fatigue crack growth rate induced by different ratios of torsion to bending loading in AlCu4Mg1

✍ D. Rozumek; E. Macha 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 304 KB

## Abstract The paper presents the results of tests on fatigue crack growth under proportional torsion with bending in AlCu4Mg1 aluminium alloy. Specimens with rectangular cross‐sections and stress concentrator in the form of external one‐sided sharp notch were used. The tests were performed under