Tetrathiafulvalenes have been examined as metal-free electrocatalysts for the cathodic reduction of oxygen at monolayer carbon diffusion electrodes in sulphuric acid. The polarizability of the electrodes increases in the following order: conjugativelyconnectd polymeric tetrathiafulvalenes, catalyst-
The effect of diluting ruthenium by iron in RuxSey catalyst for oxygen reduction
✍ Scribed by Cyril Delacôte; Adam Lewera; Marcin Pisarek; Pawel J. Kulesza; Piotr Zelenay; Nicolas Alonso-Vante
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 338 KB
- Volume
- 55
- Category
- Article
- ISSN
- 0013-4686
No coin nor oath required. For personal study only.
✦ Synopsis
This study has focused on the synthesis of novel oxygen reduction reaction (ORR) chalcogenide catalysts, with Ru partially replaced by Fe in a cluster-type Ru x Se y . The catalysts were obtained by thermal decomposition of Ru 3 (CO) 12 and Fe(CO) 5 in the presence of Se. As indicated by the XPS data, the composition of catalyst nanoparticles depends on the solvent used (either p-xylene or dichlorobenzene). The presence of iron in synthesized catalysts has been confirmed by both EDAX and XPS. Voltammetric activation of the catalysts results in a partial removal of iron and unreacted selenium from the surface. The ORR performance of electrochemically pre-treated catalysts was evaluated using rotating disk and ring-disk electrodes in a sulfuric acid solution. No major change in the ORR mechanism relative to the Se/Ru catalyst has been observed with Fe-containing catalysts.
📜 SIMILAR VOLUMES
A carbon prepared from a copolymer Saran, and the products resulting from its reaction with NH, and HNO, under different experimental conditions to introduce nitrogen and oxygen surface groups, have been used as supports for Fe and Ru catalysts. The catalysts have been characterized by HZ and CO che
The oxidized form of a model, fused iron catalyst for ammonia synthesis, containing large amounts of wustite (ca. 40 wt.-%), was activated by reduction. The reduction of catalyst samples with different thermal history and different grain size was continuously monitored by thermogravimetry as well as