✦ LIBER ✦

The Effect of Different Sterilization Methods on the Mechanical Strength of Magnesium Based Implant Materials

✍ Scribed by Jan-Marten Seitz; Kelly Collier; Eric Wulf; Dirk Bormann; Nina Angrisani; Andrea Meyer-Lindenberg; Friedrich-Wilhelm Bach

Publisher: John Wiley and Sons
Year: 2011
Tongue: English
Weight: 474 KB
Volume: 13
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.201100074

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of artificial weathering on the

Effects of artificial weathering on the mechanical properties of paper-based materials consolidated with polymeric materials

✍ Alice Baldin; Andrea Gorassini; Elisabetta Princi; Silvia Vicini; Antonio Zappal 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 92 KB 👁 1 views

Dynamic mechanical analysis of FRP compo

Dynamic mechanical analysis of FRP composites based on different fiber reinforcements and epoxy resin as the matrix material

✍ P. Ghosh; N. R. Bose; B. C. Mitra; S. Das 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 144 KB 👁 1 views

Three-ply composite laminates prepared from E-glass or N-glass chopped strand mats (CSMs) and jute (J) fabrics as reinforcing agents and amine-cured epoxy resin as the matrix material were subjected to dynamic mechanical thermal analysis at a fixed frequency of 1 Hz over a temperature range of 30-18

Effect of disinfection by microwave irra

Effect of disinfection by microwave irradiation on the strength of intact and relined denture bases and the water sorption and solubility of denture base and reline materials

✍ Rosangela Seiko Seó; Carlos Eduardo Vergani; Eunice Teresinha Giampaolo; Ana Clá 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB

Effect of organoclay on the thermal stab

Effect of organoclay on the thermal stability, mechanical strength, and surface wettability of injection-molded ABS–clay nanocomposite materials prepared by melt intercalation

✍ Jui-Ming Yeh; Chi-Lun Chen; Chao-Chen Huang; Fang-Chia Chang; Shia-Chung Chen; P 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 2 views

## Abstract In this article, a series of polymer–clay nanocomposite (PCN) materials consisted of commercial thermoplastic ABS matrix and dispersing inorganic organoclay platelets were successfully prepared by melt intercalation through the twin‐roller mixer. The as‐prepared materials in the form of