๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The effect of cup inclination and wear on the contact mechanics and cement fixation for ultra high molecular weight polyethylene total hip replacements

โœ Scribed by Xijin Hua; B. Michael Wroblewski; Zhongmin Jin; Ling Wang

Book ID
113797168
Publisher
Elsevier Science
Year
2012
Tongue
English
Weight
927 KB
Volume
34
Category
Article
ISSN
1350-4533

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of slide track shape on the wear
Effect of slide track shape on the wear of ultra-high molecular weight polyethylene in a pin-on-disk wear simulation of total hip prosthesis
โœ Vesa Saikko; Olof Calonius; Jaakko Kerรคnen ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 334 KB

## Abstract Prosthetic joints appear to show a strong relationship between the type of relative motion and wear, requiring careful consideration in the design of wear simulators. This relationship was studied with a 12โ€station pinโ€onโ€disk device, specifically adapted for the wear simulation of pros

Effect of cup inclination angle during m
Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOXยฎ delta ceramic-on-ceramic total hip replacement
โœ Mazen Al-Hajjar; Ian J. Leslie; Joanne Tipper; Sophie Williams; John Fisher; Lou ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 478 KB

## Abstract Ceramicโ€onโ€ceramic (CoC) bearings in total hip replacements (THRs) have shown low wear volumes under standard gait in hip simulator studies. However, clinical reports have indicated variations in wear rates and formation of stripeโ€like wear area on the ceramic femoral heads. The aim of