𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The effect of crank position and backrest inclination on shoulder load and mechanical efficiency during handcycling

✍ Scribed by U. Arnet; S. van Drongelen; M. Schlüssel; V. Lay; L. H. V. van der Woude; H. E. J. Veeger

Book ID
117963493
Publisher
John Wiley and Sons
Year
2012
Tongue
English
Weight
643 KB
Volume
24
Category
Article
ISSN
0905-7188

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effects of work load and operation p
The effects of work load and operation position on the spine during manual activity
✍ Ming-chyuan Lin 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 151 KB 👁 3 views

The objective of this research is to provide designers with efficient work posture guidance for the design of workplaces. Analysis of data produced through the use of electromyography (EMG) facilitated the achievement of this objective. In the experimental study, essential anthropometric data such

Effect of cup inclination angle during m
Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement
✍ Mazen Al-Hajjar; Ian J. Leslie; Joanne Tipper; Sophie Williams; John Fisher; Lou 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 478 KB

## Abstract Ceramic‐on‐ceramic (CoC) bearings in total hip replacements (THRs) have shown low wear volumes under standard gait in hip simulator studies. However, clinical reports have indicated variations in wear rates and formation of stripe‐like wear area on the ceramic femoral heads. The aim of