Turbine-generator shafts are often subjected to a complex transient torsional loading. Such transient torques may initiate and propagate a circumferential crack in the shafts. Mode III crack growth in turbo-generator shafts often results in a fracture surface morphology resembling a factory roof. The interaction of the mutual fracture surfaces results in a pressure and a frictional stress field between fracture surfaces when the shaft is subjected to torsion. This interaction reduces the effective Mode III stress intensity factor.
The effective stress intensity factor in circumferentially cracked round shafts is evaluated for a wide range of applied torsional loading by considering a pressure distribution between mating fracture surfaces. The pressure between fracture surfaces results from climbing of asperities respect to each other. The pressure profile not only depends on the fracture surface roughness (height and width (wavelength) of the peak and valleys), but also depends on the magnitude of the applied Mode III stress intensity factor. The results show that asperity interactions significantly reduce the effective Mode III stress intensity factor. However, the interactions diminish beyond a critical applied Mode III stress intensity factor. The critical stress intensity factor depends on the asperities height and wavelength. The results of these analyses are used to find the effective stress intensity factor in various Mode III fatigue crack growth experiments. The results show that Mode III crack growth rate is related to the effective stress intensity factor in a form of the Paris law.