## Abstract The influence of zone drawing on bulk properties and structure of metallocene polyethylene (__m__‐PE) is reported. Two different __m__‐PE materials were subjected to tensile stresses above the yield point by zone drawing in the temperature range from 50 to 100°C. Drawn materials were ch
The effect of chain architecture on “sharkskin” of metallocene polyethylenes
✍ Scribed by Mercedes Fernández; Juan Francisco Vega; Anton Santamaría; Antonio Muñoz-Escalona; Pilar Lafuente
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 91 KB
- Volume
- 21
- Category
- Article
- ISSN
- 1022-1336
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract The rheology of linear and branched metallocene polyethylenes (m‐PEs) was investigated. The linear metallocenes were prepared by gas‐phase polymerization, while the branched PEs were commercial resins. Molecular parameters such as __M__~__w__~, branch type, and molecular weight distribu
Thermolysis, coupled with reactive distillation, was investigated as a process to convert waste olefin-based polymers into value-added products. The degradation of two types of polyethylene, linear low and high density, was investigated. The initial molecular structure of the polymer was found to ha
## Abstract Flow performance of metallocene linear low‐density polyethylene (mLLDPE) containing small amounts of polyethylene glycol (PEG) diatomite and diatomite/PEG binary processing aids respectively was investigated. The mLLDPE melt viscosity is increased by the addition of diatomite, but is de