✦ LIBER ✦

The effect of austenite crystal volume on theMstemperature of austenitic Fe-Ni-C alloy single crystals

✍ Scribed by T. N. Durlu

Publisher: Springer
Year: 1980
Tongue: English
Weight: 168 KB
Volume: 15
Category: Article
ISSN: 0022-2461
DOI: 10.1007/bf02396804

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of austenite crystal volume o

The effect of austenite crystal volume on theMstemperature of austenitic Fe-Ni-C alloy single crystals

✍ T. N. Durlu 📂 Article 📅 1980 🏛 Springer 🌐 English ⚖ 168 KB

Deformation properties of austenitic Fe-

Deformation properties of austenitic Fe-Ni-C alloy single crystals

✍ T. N. Durlu 📂 Article 📅 1979 🏛 Springer 🌐 English ⚖ 695 KB

Effect of carbide volume fraction on the

Effect of carbide volume fraction on the oxidation of austenitic Fe-Cr-C alloys

✍ L. B. Susanto; D. J. Young 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 755 KB

A series of Fe-15Cr-(2-3)Mo alloys (compositions in weight percent) was produced with different carbon concentrations, to control the distribution of chromium between matrix metal and M 23 C 6 precipitates. The alloys were oxidized in the austenitic state at 850 C in pure oxygen, with and without a

Effect of solution strengthening of aust

Effect of solution strengthening of austenite on martensite transformation in Fe-Ni-C alloys

✍ T.Y. Hsu (Xu Zuyao); Jian Li; Zhenpeng Zeng 📂 Article 📅 1986 🏛 Elsevier Science ⚖ 730 KB

Effects of copper and carbon on the wear

Effects of copper and carbon on the wear resistance of Fe–Ni–Cu–C austenitic alloys

✍ Ki Nam Kim; Kang Hee Ko; Myung Chul Park; Gyeong Su Shin; Seon Jin Kim 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 907 KB

The effects of carbon and copper concentrations on adhesive wear behavior of Fe-14Ni-xCu-yC (x = 0-8 wt.%, y = 0.6-1.0 wt.%) were investigated with respect to the strain-induced martensitic transformation and hardness. The critical energy required to initiate the martensitic transformation increased

The effects of nickel and carbon concent

The effects of nickel and carbon concentrations on the wear resistance of Fe–Ni–C austenitic alloys

✍ Ji Hui Kim; Kwon-Yeong Lee; Kang Hee Ko; Ji Young Kim; Ki Nam Kim; Joon Young Oh 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 770 KB

The effects of nickel and carbon concentrations on the wear resistance of Fe-xNi-yC (x = 14-20 wt.%, y = 0.6-1.0 wt.%) were investigated with respect to strain energy initiation of the martensitic transformation and hardness. The strain energy needed to initiate the martensitic transformation increa