𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The effect of alkalization and fiber loading on the mechanical properties of bamboo fiber composites, Part 1: — Polyester resin matrix

✍ Scribed by Mahuya Das; Debabrata Chakraborty


Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
362 KB
Volume
112
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Effect of fiber treatment on the mechani
✍ Pedro J. Herrera-Franco; Manuel de J. Aguilar-Vega 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 389 KB 👁 2 views

The degree of mechanical reinforcement that could be obtained by the introduction of henequen cellulosic fibers in a low-density polyethylene, LDPE, matrix was assessed experimentally. Composite materials of LDPE-henequen cellulosic fibers were prepared by mechanical mixing. The concentration of ran

Effect of fiber pretreatment condition o
✍ Jingshen Wu; Demei Yu; Chi-Ming Chan; Jangkyo Kim; Yiu-Wing Mai 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 489 KB 👁 2 views

The effect of fiber surface pretreatment on the interfacial strength and mechanical properties of wood fiber/polypropylene (WF/PP) composites are investigated. The results demonstrate that fiber surface conditions significantly influence the fiber-matrix interfacial bond, which, in turn, determines

Effect of needle density on the mechanic
✍ T.-M. Wu; C.-B. Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 267 KB 👁 2 views

The partial impregnation textile preform consisting of chopped-strand, long glass fiber and nonwoven polypropylene (PP) has been prepared by needle-punching to improve fiber-matrix distribution before processing. These unconsolidated textile preforms were then preheated and hot-pressed for consolida