✦ LIBER ✦

The ductility and strength of Fe−Cr−Al alloys

✍ Scribed by A. S. Tikhonov; S. I. Bulat

Book ID: 112384588
Publisher: Springer US
Year: 1971
Tongue: English
Weight: 208 KB
Volume: 13
Category: Article
ISSN: 0026-0673
DOI: 10.1007/bf00665005

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Ductility and strength of wear resistant

Ductility and strength of wear resistant Fe−Cr−C steels

✍ S. I. Bulat; A. S. Tikhonov; O. G. Chernyshev 📂 Article 📅 1973 🏛 Springer US 🌐 English ⚖ 317 KB

High-strengthβ-alloys of the Ti−Mo−Cr−Fe

High-strengthβ-alloys of the Ti−Mo−Cr−Fe−Al system

✍ N. V. Ageev; S. G. Glazunov; L. A. Petrova; G. N. Tarasenko; L. P. Grankova 📂 Article 📅 1967 🏛 Springer US 🌐 English ⚖ 472 KB

Initial Oxidation of Fe–Al and Fe–Cr–Al

Initial Oxidation of Fe–Al and Fe–Cr–Al Alloys: Cr as an Alumina Booster

✍ M. H. Heinonen; K. Kokko; M. P. J. Punkkinen; E. Nurmi; J. Kollár; L. Vitos 📂 Article 📅 2011 🏛 Springer-Verlag 🌐 English ⚖ 719 KB

Influence of γ′ precipitation on the cre

Influence of γ′ precipitation on the creep strength and ductility of an austenitic Fe-Ni-Cr alloy

✍ Plumtree, A. ;Persson, N-G. 📂 Article 📅 1976 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 651 KB

Hot working and resultant 300°C ductilit

Hot working and resultant 300°C ductility of AlFe and AlFeCo alloys

✍ G. Avramovic-Cingara; H.J. McQueen; A. Salama; T.R. McNelley 📂 Article 📅 1989 🏛 Elsevier Science ⚖ 781 KB

Nitriding of ferritic Fe–Cr–Al alloys

✍ K.S. Jung; R.E. Schacherl; E. Bischoff; E.J. Mittemeijer 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 552 KB

Upon nitriding ferritic iron-based Fe-Cr-Al alloys (containing 0.25-1.25 at.% Cr and Al) a very hard surface layer develops containing nano-precipitates of alloying element nitrides. The microstructure of the nitrided zone was investigated by X-ray diffraction (XRD) and transmission electron microsc