The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

✍ Scribed by I. Sabirov; D. Duschlbauer; H.E. Pettermann; O. Kolednik

• Publisher: Elsevier Science
• Year: 2005
• Tongue: English
• Weight: 447 KB
• Volume: 393
• Category: Article
• ISSN: 0921-5093
• DOI: 10.1016/j.msea.2004.10.013

✦ Synopsis

A procedure is proposed to determine, for second-phase particles near a crack tip, the maximum particle stresses at the moment of void initiation by either particle fracture or particle/matrix interface separation. A digital image analysis system is applied to perform a quantitative analysis of corresponding fracture surface regions from stereo image pairs taken in the scanning electron microscope. The fracture surface analysis is used to measure, for individual particles, the crack tip opening displacement at the moment of void initiation and the particle location with respect to the crack tip. From these data, the stress tensor at the moment of void initiation is calculated from the Hutchinson-Rice-Rosengren (HRR) field theory. The corresponding average local stresses within the particle are evaluated by a non-linear Mori-Tanaka-type approach. These stresses are compared to estimates according to the models by Argon et al. [A.S. Argon, J. Im, R. Safoglu, Metall. Trans. 6 (1975) 825] and Beremin [F.M. Beremin, Metall. Trans. 12 (1981) 723]. The procedure is demonstrated on an Al6061-10% Al 2 O 3 metal matrix composite.