✦ LIBER ✦

The Determination of Corrosion Rates Using Polarisation Resistance Measurements and Some Practical Applications

Book ID: 118284990
Publisher: John Wiley and Sons
Year: 1975
Weight: 404 KB
Volume: 77
Category: Article
ISSN: 0931-5985
DOI: 10.1002/lipi.19750770406

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Simultaneous Determination of Instantane

Simultaneous Determination of Instantaneous Corrosion Rates and Tafel Slopes from Polarization Resistance Measurements

✍ Mansfeld, Florian 📂 Article 📅 1973 🏛 The Electrochemical Society 🌐 English ⚖ 325 KB

Problems arising in the determination of

Problems arising in the determination of accurate corrosion rates from polarization resistance measurements

✍ G.W. Walter 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 627 KB

Measuring the corrosion rate of steel in

Measuring the corrosion rate of steel in concrete – effect of measurement technique, polarisation time and current

✍ P. V. Nygaard; M. R. Geiker 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 854 KB

Use of impedance measurements for the de

Use of impedance measurements for the determination of the instant rate of metal corrosion

✍ I. Epelboin; M. Keddam; H. Takenouti 📂 Article 📅 1972 🏛 Springer 🌐 English ⚖ 721 KB

Applicability of interrupter resistance

Applicability of interrupter resistance measurements using the MicroRint® in daily practice

✍ H.G.M. ARETS; H.J.L. BRACKEL; C.K. VAN DER ENT 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 191 KB

Determination of Polarization resistance

Determination of Polarization resistance and corrosion rate by using pulse method, polarization curves and AAS

✍ Doc. Dr.-Ing. M. Metikoš-Huković; Dr.-Ing. C. Zevnik 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 German ⚖ 684 KB

## Abstract In this article, a presentation is made of the application of accelerated electrochemical methods in measuring the corrosion rates of electrolytic zinc coatings obtained from acid sulfate baths, with and without organic additives. The influence of deposition parameters on the corrosion