✦ LIBER ✦

The cutting performance of a TiN-coated drill with curved primary cutting edges

✍ Scribed by Wen-Chou Chen; Kuang-Hua Fuh

Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 895 KB
Volume: 49
Category: Article
ISSN: 0924-0136
DOI: 10.1016/0924-0136(94)01326-v

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Cutting performance of thick web drills

Cutting performance of thick web drills with curved primary cutting edges

✍ Kuang-Hua Fuh; Wen-Chou Chen 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 947 KB

The optimum composition of Me–C:H coatin

The optimum composition of Me–C:H coatings on drills for cutting performance

✍ W.H. Kao; Y.L. Su; S.H. Yao; J.M. Luan 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 446 KB

Laboratory characterisation of the wear

Laboratory characterisation of the wear behaviour of PVD-coated tool steels and correlation with cutting tool performance

✍ K.L. Rutherford; S.J. Bull; E.D. Doyle; I.M. Hutchings 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 553 KB

The effect of a thin coating of insulati

The effect of a thin coating of insulating material on the performance of cutting tools

✍ E. Lenz; D. Pnueli; L. Rozeanu 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 446 KB

Optimization of wet micro-blasting on PV

Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools’ cutting performance

✍ K.-D. Bouzakis; G. Skordaris; E. Bouzakis; A. Tsouknidas; S. Makrimallakis; S. G 📂 Article 📅 2011 🏛 International Academy for Production Engineering 🌐 English ⚖ 567 KB

On the Effects of Residual Stresses Indu

On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools with Finite Edge Radii in Turning Operations

✍ J.C. Outeiro; A.M. Dias; I.S. Jawahir 📂 Article 📅 2006 🏛 International Academy for Production Engineering 🌐 English ⚖ 782 KB

This paper presents an analysis of residual stresses in turning of AISI 316L and AISI 1045 steels with coated and uncoated tools having finite edge radii. An analytical predictive model, and experimental techniques involving X-ray diffraction and IR thermal imaging were used. Machining with coated t