The publisher regrets that during the processing of the above paper Fig. 4 was published incorrectly. The updated Fig. 4 is reproduced correctly below. www.elsevier.com/locate/apsusc Applied Surface Science 252 (2006) 3092 Fig. 4. The anodic polarization curves obtained for bare MS and MS/Ni electro
The corrosion performance of polyaniline on nickel plated mild steel
✍ Scribed by A.T. Özyılmaz; G. Kardaş; M. Erbil; B. Yazıcı
- Publisher
- Elsevier Science
- Year
- 2005
- Tongue
- English
- Weight
- 277 KB
- Volume
- 242
- Category
- Article
- ISSN
- 0169-4332
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
Polyaniline (PANI) coatings were electrochemically synthesized on nickel (Ni) coated mild steel (MS) and their corrosion protection properties were investigated. In this work, the Ni layer (∼1 m thick) was electrodeposited on MS under galvanostatic condition. Thereafter, the PANI coating was deposit
## Abstract Nanostructured materials have been establishing themselves as modern generation of high performance materials in many areas ranging from automotive engineering to bioengineering owing to a vast array of their unique properties. Improvements in environmental impact can also be achieved u
## Abstract Electropolymerization of polyaniline (PANI) and polyaniline‐tungstate (PANIW) coatings on mild steel were successfully performed using cyclic voltammetry technique. Processes were carried out in aqueous electrolyte solutions of 0.3 M oxalic acid + 0.1 M aniline and 0.3 M oxalic acid + 0