✦ LIBER ✦

The contact section of powder compacts and sintered bodies, and the values of their mechanical properties related to the contact section

✍ Scribed by M. Yu. B al'nshin

Book ID: 112406031
Publisher: Springer
Year: 1964
Tongue: English
Weight: 291 KB
Volume: 2
Category: Article
ISSN: 1573-9066
DOI: 10.1007/bf00774032

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Structure and properties of powder metal

Structure and properties of powder metallurgy chromium sintered by the electrical contact heating method

✍ L. O. Andrushchik; O. N. Balakshina; S. P. Oshkaderov; E. N. Severyanina 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 399 KB

Relation between Contact Angle and the C

Relation between Contact Angle and the Cross-Sectional Area of Small, Sessile Liquid Drops

✍ Extrand, C. W. 📂 Article 📅 2006 🏛 American Chemical Society 🌐 English ⚖ 58 KB

Connection between the mechanical proper

Connection between the mechanical properties of high-modulus yarns and their effective cross section

✍ E. V. Lugert; M. N. Ivanov; K. E. Perepelkin; Z. V. Vlasova 📂 Article 📅 1993 🏛 Springer US 🌐 English ⚖ 204 KB

Technological Bases of the Preparation,

Technological Bases of the Preparation, Structure and Properties of Powder Steels Sintered by Electric Contact Heating of Annular Specimens

✍ Leonid O. Andrushchik 📂 Article 📅 2003 🏛 Springer 🌐 English ⚖ 333 KB

Getting to Know You: The Contact Hypothe

Getting to Know You: The Contact Hypothesis Applied to the Sectional Beliefs and Attitudes of White Southerners

✍ John Shelton Reed 📂 Article 📅 1980 🏛 University of North Carolina Press 🌐 English ⚖ 308 KB

Effects of compaction pressure and parti

Effects of compaction pressure and particle shape on the porosity and compression mechanical properties of sintered Ti6Al4V powder compacts for hard tissue implantation

✍ Mustafa Güden; Emrah Çelik; Alpay Hızal; Mustafa Altındiş; Sinan Çetiner 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 806 KB

## Abstract Sintered Ti6Al4V powder compacts potentially to be used in implant applications were prepared using commercially available spherical and angular powders (100–200 μm) within the porosity range of 34–54%. Cylindrical green powder compacts were cold compacted at various pressures and then