✦ LIBER ✦

The combined effect of refractory coatings containing reactive elements on high temperature oxidation behavior of chromia-forming alloys

✍ Scribed by S Chevalier; G Bonnet; J.P Larpin; J.C Colson

Book ID: 117086031
Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 416 KB
Volume: 45
Category: Article
ISSN: 0010-938X
DOI: 10.1016/s0010-938x(03)00017-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The Effects of Surface-Applied Oxide Fil

The Effects of Surface-Applied Oxide Films Containing Varying Amounts of Yttria, Chromia, or Alumina on the High-Temperature Oxidation Behavior of Chromia-Forming and Alumina-Forming Alloys

✍ H. B. Qi; D. G. Lees 📂 Article 📅 2000 🏛 Springer-Verlag 🌐 English ⚖ 388 KB

The influence of certain reactive elemen

The influence of certain reactive elements on the oxidation behaviour of chromia- and alumina-forming alloys

✍ S Mrowec; J Jedliński; A Gil 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 771 KB

Effect of Cycle Frequency on High-Temper

Effect of Cycle Frequency on High-Temperature Oxidation Behavior of Alumina-Forming Alloys

✍ B.A. Pint; P.F. Tortorelli; I.G. Wright 📂 Article 📅 2002 🏛 Springer-Verlag 🌐 English ⚖ 334 KB

Effects of Silicon on the Oxidation Beha

Effects of Silicon on the Oxidation Behavior of Ni-Base Chromia-Forming Alloys

✍ B. Li; B. Gleeson 📂 Article 📅 2006 🏛 Springer-Verlag 🌐 English ⚖ 453 KB

The effect of ceria coatings on the high

The effect of ceria coatings on the high-temperature oxidation of iron-chromium alloys

✍ R.J Hussey; P Papaiacovou; J Shen; D.F Mitchell; M.J Graham 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 457 KB

Influence of the mode of introduction of

Influence of the mode of introduction of a reactive element on the high temperature oxidation behavior of an alumina-forming alloy. Part II: Cyclic oxidation tests

✍ S. Chevalier; A. P. Dawah Tankeu; H. Buscail; C. Issartel; G. Borchardt; J. P. L 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 569 KB

## Abstract Several routes of yttrium introduction were applied to test the high temperature oxidation performance of a FeCrAl alloy. Isothermal oxidation tests were described in a previous paper (Part I of this paper in this journal, 2004, 55, 352). Cyclic oxidation tests were performed in air und