Using the C.E.R.L. absorption apparatus~, flue gas is sampled at i.o l/min for about 15 min. The sulphur trioxide is absorbed in a total of ioo ml of aqueous isopropanol.
The automatic estimation of sulphur trioxide in flue gas
β Scribed by Gillham, E. W. F.
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 1946
- Weight
- 547 KB
- Volume
- 65
- Category
- Article
- ISSN
- 0368-4075
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Experimonts conducted during the development of an earlier instrument showed that the acidic sulphur oxides present in washed flue gas were not readily absorbed by hydrogen peroxide solutions, whereas sulphur dioxide was completely absorbed. These experiments have been extended, and by the use of a wetted sintered glass disc, complete absorption is effected. Distilled water absorbs sulphur trioxide completely; a trace of sulphur dioxide is absorbed, and is removed by scrubbing the solution with acidβfree Hue gas. Descriptions are given of devices used to ensure constancy of flow conditions in the instrument under all conditions of plant load, thus ensuring that the electrical conductivity of the absorbent is strictly proportional to the sulphur trioxide content of the flue gas.
π SIMILAR VOLUMES
## Abstract The limitations of existing methods of testing for sulphur dioxido and sulphur trioxido are discussed, and a now method proposed whereby these constituents are absorbed under acid conditions. By absorption of sulphur trioxido in distilled water, absorption and subsequent oxidation of th
## Abstract The reaction of gaseous sulphur trioxide with gaseous benzene has been studied at three different temperatures with different ratios of the reactants. The reactions are rapid. The number of products can be rather large and depends on the ratio of sulphur trioxide to benzene. At low rat
Tlic clcclioii of tlic locnl scctioniil cointiiittco took IJIncO, witti tlic rcstilt tlint tlru coiiiiitittcc ns priiitcd irbovu \\we clcctcd to scrvo for tho iicst tlircu ycnra.
## Abstract The standard S.T.P.T.C\* method of estimating total sulphur was designed primarily for determining sulphur in commercial products, in particular motor benzoic, of which tlio sulphur content is between 0Β·1 and 0Β·4% w/w. In connection with the estimation of individual sulphur compounds in