𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The ANN application in FEM modeling of mechanical properties of Al–Si alloy

✍ Scribed by Mohsen Ostad Shabani; Ali Mazahery

Publisher
Elsevier Science
Year
2011
Tongue
English
Weight
710 KB
Volume
35
Category
Article
ISSN
0307-904X

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and mechanical properties
Microstructure and mechanical properties of spray deposited hypoeutectic Al–Si alloy
✍ C.F. Ferrarini; C. Bolfarini; C.S. Kiminami; W.J. Botta F 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 207 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The alloy was gas atomized with argon and deposited onto a copper substrate. The microstructure was evaluated by optical microscopy (OM), scanning ele

Microstructure and mechanical properties
Microstructure and mechanical properties of extruded Al–Si alloy (A356) in the semi-solid state
✍ M.A. Bayoumi; M.I. Negm; A.M. El-Gohry 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 1000 KB

Smooth round bars were produced from conventional non-modified cast alloy, A356, by semi-solid extrusion after isothermal holding in mushy zone. Extrusion process was carried out in an apparatus, designed and prepared for this purpose at a ram speed, 2.5 mm/s. Three forming temperatures: 560, 570 an

Microstructure, mechanical properties an
Microstructure, mechanical properties and bio-corrosion properties of Mg–Si(–Ca, Zn) alloy for biomedical application
✍ Erlin Zhang; Lei Yang; Jianwei Xu; Haiyan Chen 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 506 KB

Mg-Si alloy was investigated for biomedical application due to the biological function of Si in the human body. However, Mg-Si alloy showed a low ductility due to the presence of coarse Mg(2)Si. Ca and Zn elements were used to refine and modify the morphology of Mg(2)Si in order to improve the corro