✦ LIBER ✦

Testing of novel sorbents for H2S removal from coal gas

✍ Scribed by Gangwal, S. K. ;Stogner, J. M. ;Harkins, S. M. ;Bossart, S. J.

Publisher: American Institute of Chemical Engineers
Year: 1989
Tongue: English
Weight: 815 KB
Volume: 8
Category: Article
ISSN: 0278-4491
DOI: 10.1002/ep.3300080110

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Polyethyleneimine-containing sol-gels as

Polyethyleneimine-containing sol-gels as novel sorbents for the removal of cadmium from aqueous solutions

✍ Shirin Bahrami; Amarjeet S. Bassi; Ernest Yanful 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 542 KB

Regenerative Adsorption and Removal of H

Regenerative Adsorption and Removal of H2S from Hot Fuel Gas Streams by Rare Earth Oxides.

✍ Maria Flytzani-Stephanopoulos; Mann Sakbodin; Zheng Wang 📂 Article 📅 2006 🏛 John Wiley and Sons ⚖ 10 KB

Development of nickel-activated catalyti

Development of nickel-activated catalytic filters for tar removal in H2S-containing biomass gasification gas

✍ Yuhong Zhang; Dirk J Draelants; Karen Engelen; Gino V Baron 📂 Article 📅 2003 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 96 KB

## Abstract The urea method was applied to deposit a nickel–calcium catalyst inside porous filter discs to develop a gas cleaning technique involving the combined removal of tars and particles from hot biomass gasification gas. Some catalytic filter discs were tested in typical filtration condition

A Novel Dry Process for Simultaneous Rem

A Novel Dry Process for Simultaneous Removal of SO2 and NO from Flue Gas in a Powder-Particle Fluidized Bed

✍ G. Luo; A. Yoneda; K. Kato 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 236 KB 👁 2 views

Corrosion resistant alloys for oil and g

Corrosion resistant alloys for oil and gas production: Guidance on general requirements and test methods for H2S service. Working Party Report published for the European Federation of corrosion (EFC), Publications Number 17, 84 Seiten, The Institute of Materials, London 1996, US $ 40.00, ISBN 1-86125-001-0

✍ H. Höpfner 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 German ⚖ 180 KB 👁 1 views

Validity of isometric strength tests for

Validity of isometric strength tests for predicting endurance work tasks of coal miners : Jackson, A S, Osburn, H G and Laughery, K RVisions. Proc Human Factors Society 35th Annual Meeting San Francisco, California 2–6 September 1991. The Human Factors Society, Santa Monica, California, Vol 1 (1991) pp 763–767 (14 refs)

📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 134 KB