𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Tension–tension fatigue behavior of unidirectional single-walled carbon nanotube reinforced epoxy composite

✍ Scribed by Yu Ren; Feng Li; Hui-Ming Cheng; Kin Liao

Publisher
Elsevier Science
Year
2003
Tongue
English
Weight
332 KB
Volume
41
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Torsion fatigue behavior of unidirection
Torsion fatigue behavior of unidirectional carbon/epoxy and glass/epoxy composites
✍ Toshio Ogasawara; Keiji Onta; Shinji Ogihara; Tomohiro Yokozeki; Eiichi Hara 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 644 KB

This paper presents results of the feasibility of carbon/epoxy composites (CFRP) as a future helicopter flexbeam material. Torsional behaviors of unidirectional CFRP and glass/epoxy composites (GFRP) with the same resin matrix were investigated. The initial torsional rigidity of CFRP was almost iden

Tension–compression fatigue behavior of
Tension–compression fatigue behavior of a H-VARTM manufactured unnotched and notched carbon/epoxy composite
✍ S. Mall; D.W. Katwyk; R.L. Bolick; A.D. Kelkar; D.C. Davis 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 981 KB

The tension-compression fatigue behavior of a four-harness satin weave carbon fiber/epoxy (IM7/EPON 862) composite manufactured from the H-VARTM (Heated Vacuum Assisted Resin Transfer Molding) process was investigated. Unnotched and notched specimens were both tested in this study. The notch was a c

Multi-scale experimental analysis of the
Multi-scale experimental analysis of the tension-tension fatigue behavior of a short glass fiber reinforced polyamide composite
✍ B. Esmaeillou; J. Fitoussi; A. Lucas; A. Tcharkhtchi 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 676 KB

Fatigue life prediction requires thorough understanding of the deformation and damage mechanisms and factors influencing them. The objective of this work is to identify the main micro-mechanisms which govern the fatigue behavior of a short glass fiber reinforced polyamide composite through a multi-s

Use of Single-Walled Carbon Nanotubes as
Use of Single-Walled Carbon Nanotubes as Reinforcing Fillers in UV-Curable Epoxy Systems
✍ Marco Sangermano; Enrica Borella; Aldo Priola; Massimo Messori; Rosa Taurino; Pe 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 379 KB

## Abstract CNT were dispersed in an epoxy matrix and cured by means of UV light. An increase on elastic modulus and __T__~g~ values was measured by DMTA analysis and attributed to the constraint effect of CNT on polymer chain mobility. Excellent scratch resistant coatings characterized by high cri

Characterization of epoxy/single-walled
Characterization of epoxy/single-walled carbon nanotubes composite samples via atomic force acoustic microscopy
✍ D. Passeri; M. Rossi; A. Alippi; A. Bettucci; M.L. Terranova; E. Tamburri; F. To 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 578 KB

Atomic force acoustic microscopy technique has been used to characterize structural and mechanical properties of a nanocomposite sample, obtained by incorporating single-walled carbon nanotubes (SWCNTs) into epoxy resin. The aim of the reported preliminary characterization is to investigate the reli