The structural behaviour of Cu 50 Zr 50 and Cu 65 Zr 35 metallic glasses under uniaxial tensile stress was investigated in situ by high-energy X-ray synchrotron diffraction. The components of the elastic strain tensor were determined from both the change of positions of first maximum of the structur
Tension behavior of metallic glass coating on Cu foil
β Scribed by H.J. Pei; C.J. Lee; X.H. Du; Y.C. Chang; J.C. Huang
- Publisher
- Elsevier Science
- Year
- 2011
- Tongue
- English
- Weight
- 860 KB
- Volume
- 528
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
β¦ Synopsis
The tensile behavior of the monolithic ZrCu thin film metallic glass and the ZrCu/Cu multilayer coating on pure Cu foil is systematically examined. The extracted tensile modulus and strength of the 1 m films are in good agreement with the theoretical rule of mixture prediction. The extracted 2 m film data are lower, but can be corrected back by considering the actual intact cross-sectional area during the tensile loading. The current results reveal that the ZrCu/Cu multilayer coating exhibit much better tensile performance than the monolithic ZrCu coating despite of the brittle deformation. To obtain ductile amorphous/crystalline multilayer coating, two principles are suggested in this paper.
π SIMILAR VOLUMES
## a b s t r a c t Zr-based bulk-metallic glasses (BMGs) are being studied widely because Zr-based BMGs exhibit good glass-forming abilities and excellent properties, such as material strengths. In the current paper, the fatigue behaviors of Zr 50 Cu 40Γx Al 10 Pd x [x: 0-7 atomic percent (at.%)]
The corrosion resistances of Cu 60 Zr 30 Ti 10 bulk metallic glass and their derivatives formed by addition of a small amount of Nb, Mo or Ta were evaluated in 1N HCl, 1N H 2 SO 4 , 1N HNO 3 , 1N NaOH and 3% NaCl aqueous solutions by weight loss and polarization curve measurements. Their surfaces we