Based on the von Kรกrmรกn plate theory, the mechanics of a shaft-loaded blister test for thin film/substrate systems is studied by considering elastic substrate deformations and residual stresses in these films. In testing, films are attached to a substrate provided with a circular hole, through which
Tensile testing of thin films supported on compliant substrates
โ Scribed by Xu Chen; Bradley L. Kirsch; Robert Senter; Sarah H. Tolbert; Vijay Gupta
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 452 KB
- Volume
- 41
- Category
- Article
- ISSN
- 0167-6636
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
Si 1รx Ge x thin films on the Ar + ion-implanted Si substrates with different implantation energy (30 keV, 40 keV and 60 keV) at the same implantation fluence (3 โข 10 15 cm ร2 ) were grown by ultra high vacuum chemical vapor deposition (UHVCVD). Various characterization technologies were used to cha
## Abstract This paper presents the results of tensile and high cycle fatigue tests for copper thin film. Copper films coated by Sn are often used in various electro devices. Especially, when the film is used in tape carrier package (TCP), the film is repeatedly exposed to mechanical or(and) therma
This paper represents the results of tensile and fatigue tests of NiCo thin films, to investigate the effect of size on mechanical properties. The "dog-bone" type Specimen with reduced section widths of 50 m and 150 m were fabricated on two 6 inch wafers using electro-plating process and MEMS proces