๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Tensile testing of elastomers at ultra-high strain rates

โœ Scribed by J. W. Jones

Publisher
John Wiley and Sons
Year
1960
Tongue
English
Weight
685 KB
Volume
4
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

โœฆ Synopsis

Abstract

A tensile and compressive test apparatus actuated by smokeless powder with a test speed capability in the 10^5^ in./min. range is described. Preliminary tensile property data for cast polyurethan elastomer is discussed.

๐Ÿ“œ SIMILAR VOLUMES

Performance of MWCNT/HDPE Nanocomposites
Performance of MWCNT/HDPE Nanocomposites at High Strain Rates
โœ Waleed Al-Lafi; Jie Jin; Sunxi Xu; Mo Song ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 457 KB

## Abstract Performance of HDPE/MWCNT composite at high strain rate up to 10^4^โ€‰s^โˆ’1^ was investigated in a split Hopkinson pressure bar. The results revealed that the incorporation of MWCNTs into HDPE can enhance the impact strength of HDPE. High strain rate impact has a significant influence on m

Comparison of mechanical properties of P
Comparison of mechanical properties of PP/SEBS blends at intermediate and high strain rates with SiO2 nanoparticles vs. CaCO3 fillers
โœ Hiroyuki Mae; Masaki Omiya; Kikuo Kishimoto ๐Ÿ“‚ Article ๐Ÿ“… 2008 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 940 KB

## Abstract The present article focuses on the effect of two types of inorganic fillers (SiO~2~ and CaCO~3~) on the mechanical properties of PP/SEBS blend. The nominal particle diameters of SiO~2~ and CaCO~3~ are 7 nm and 1 ฮผm, respectively. The studied blend ratios were PP/SEBS/SiO~2~ (CaCO~3~) =