✦ LIBER ✦

Tensile stresses in target upon collision of rigid bodies

✍ Scribed by M. S. Kachan; Yu. A. Trishin

Publisher: SP MAIK Nauka/Interperiodica
Year: 1978
Tongue: English
Weight: 744 KB
Volume: 18
Category: Article
ISSN: 0021-8944
DOI: 10.1007/bf00851398

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stresses and displacements in cracked li

Stresses and displacements in cracked linear viscoelastic bodies that are acted upon by alternating tensile and compressive loads

✍ G.A.C. Graham 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 496 KB

The bringing of two rigid bodies into co

The bringing of two rigid bodies into collision-free contact by bounded controls in a finite time

✍ V.I. Matyukhin 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 426 KB

The control problem of moving a rigid body onto the surface of another rigid body in such a way that no collision occurs in investigated. For this, phase constraints must be satisfied in the sense that the surface of one body must not overlap the other, and here an important condition must be met: c

Nonsteady deformation and failure of com

Nonsteady deformation and failure of composite plates and shells in impulsive loading and in collisions with rigid bodies

✍ N. A. Abrosimov; V. G. Bazhenov; V. P. Stolov 📂 Article 📅 1993 🏛 Springer US 🌐 English ⚖ 537 KB

Review of high excitation energy structu

Review of high excitation energy structures in heavy ion collisions: Target excitations and three body processes

✍ N. Frascaria 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 811 KB

Investigation of the stress condition in

Investigation of the stress condition in bodies of spiral coil heat exchangers with rigid cores taking edge stresses into account

✍ P. G. Soldatenkov; S. M. Kutepov 📂 Article 📅 1968 🏛 Springer 🌐 English ⚖ 387 KB

A dynamically consistent model of the co

A dynamically consistent model of the contact stresses in the plane motion of a rigid body

✍ A.P. Ivanov 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 375 KB

The problem of determining dry friction forces in the case of the motion of a rigid body with a plane base over a rough surface is discussed. In view of the dependence of the friction forces on the normal load, the solution of this problem involves constructing a model of the contact stresses. The c