## Abstract Tensile strength of the interface between hydroxyapatite (HA) and bone was tested. Scanning electron microscopy was used to observe the tensile failure mode and the morphological change of hydroxyapatite ceramic surface in bone. The porosity of hydroxyapatite is 14% and pore size less t
Tensile strength determination of the interface between porcelain fused to gold
β Scribed by Kelly, Mike ;Asgar, Kamal ;O'Brien, William J.
- Publisher
- John Wiley and Sons
- Year
- 1969
- Tongue
- English
- Weight
- 509 KB
- Volume
- 3
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
β¦ Synopsis
A method of testing the tensile strength of the porcelain-gold bond has been developed. Tensile strengths of the bond are improved primarily by the formation of an oxide layer on the gold before baking the porcelain and not by the degree of gross surface roughness. The oxide layer may act either as a transition ayer or i t may create microsurface roughness. The gross surface roughness probably complicates the wetting action of the porcelain on the gold. Whether the actual bond is of a chemical nature, physical nature, or both, remains uncertain.
π SIMILAR VOLUMES
## Abstract The purpose of this interface was to explore the influences of dyadic and threeβway observation on clinical assessment of young families. Three independent clinicians observed a clinically referred family using semistructured play paradigms, each with only a limited view of the family.