𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Temperature sensitivity of plasticizer-polymer systems

✍ Scribed by Dyson, A.

Publisher
Wiley (John Wiley & Sons)
Year
1950
Weight
114 KB
Volume
69
Category
Article
ISSN
0368-4075

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

The mechanical propcrtics of a plasticized polymer are gencnlly admitted to depend to a large extent on the viscosity of the plasticizer. It is shown that the tempernture dependence of the viscosity of a plasticizer may be less than that of a polymer, and that the addition of a plasticizer to a polymer may reduce the sensitivity of the systcm. This conclusion is in opposition to a common interpretation of the viscosity thcory of plasticizer action, but is shown to bc in accordance with experiment.

📜 SIMILAR VOLUMES

The temperature sensitivity of the syste
The temperature sensitivity of the system plasticizer-polymer
✍ Jones, H. 📂 Article 📅 1948 🏛 Wiley (John Wiley & Sons) ⚖ 722 KB

## JONES-PLASTICIZER-POLYMER SYSTEM 4x5 TEMpERATW SENSITIVITY OF THE sensitidty one chooses plasticizers which are low in viscosity SYSTEM PLASTICIZER-POLYMER\* (and hence require to be used at low concentrations only) and which are also in themselves of low sensitivity to change of viscosity wit

Fabrication of Temperature-Sensitive Imp
Fabrication of Temperature-Sensitive Imprinted Polymer Hydrogel
✍ Xue-Yong Liu; Xiao-Bin Ding; Ying Guan; Yu-Xing Peng; Xin-Ping Long; Xiao-Chuan 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 126 KB

## Abstract **Summary:** Weakly cross‐linked temperature sensitive gels that memorize 4‐aminopyridine molecules were designed and synthesized. The polymer gels show special selectivity, good thermo‐sensitivity and reusability, which would have an enormous potential of application in drug controlled

Flocculation of kaolinite clay suspensio
Flocculation of kaolinite clay suspensions using a temperature-sensitive polymer
✍ Hongjun Li; Jun Long; Zhenghe Xu; Jacob H. Masliyah 📂 Article 📅 2007 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 415 KB

## Abstract A temperature‐sensitive polymer, poly(N‐isopropylacrylamide) [poly(NIPAM)], was tested to flocculate kaolinite clay suspensions. Settling tests at both room temperature and 40°C were carried out. The results show that settling at 40°C resulted in significantly higher settling rates and

Temperature dependence of dynamic mechan
Temperature dependence of dynamic mechanical properties of mixed polymer systems
✍ A. D. McIntyre 📂 Article 📅 1961 🏛 John Wiley and Sons 🌐 English ⚖ 790 KB

## Abstract The temperature dependence of the viscous component __E__~2~(1/__T__) of the dynamic modulus is reported for a homologous series of butadiene–styrene copolymers incorporated at various levels in styrene homopolymer. By the use of a vibrating reed technique based on resonance tuning, the