Temperature and moist-stability effects on midlatitude orographic precipitation
β Scribed by Daniel J. Kirshbaum; Ronald B. Smith
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 834 KB
- Volume
- 134
- Category
- Article
- ISSN
- 0035-9009
- DOI
- 10.1002/qj.274
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Idealized, convectionβresolving simulations of moist orographic flows are conducted to investigate the influence of temperature and moist stability on the drying ratio (DR), defined as the fraction of the impinging water mass removed as orographic precipitation. In flow past a long ridge, where most of the air rises over the barrier rather than detouring around it, DR decreases as the surface temperature (T~s~) increases, even as the orographic cap cloud becomes statically unstable at higher T~s~ and develops embedded convection. This behaviour is explained by a few physical principles: (1) the ClausiusβClapeyron equation dictates that the normalized condensation rate decreases as the flow gets warmer, (2) the replacement of iceβphase precipitation growth with warmβrain processes decreases the efficiency by which condensate is converted to precipitation, thereby lowering precipitation efficiency, and (3) embedded convection acts more to vertically redistribute moisture than to enhance precipitation. Over an isolated mountain, the effects of (1) and (2) are counteracted by moisture deflection around the barrier, which is stronger in the colder, more stable flows. Copyright Β© 2008 Royal Meteorological Society
π SIMILAR VOLUMES
## Abstract Characterization and quantification of precipitation spatial variability are required for many studies, such as those in hydrology, ecology, forestry and agriculture. In mountainous terrains (e.g. Taiwan), interactions of moist air mass with underlying complex topography result in incre
The increasing supplies of fast-grown woods grown on short rotations contain significantly higher proportions of juvenile wood with properties different from those of mature wood. Improved processes will be required to produce dried wood that is satisfactorily stable with few distortional or dimensi