✦ LIBER ✦

TEM assessment of HVOLF thermally sprayed Al–12 wt.% Sn–1 wt.% Cu alloy

✍ Scribed by C.J. Kong; P.D. Brown; A. Horlock; S.J. Harris; D.G. McCartney

Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 470 KB
Volume: 375-377
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2003.10.123

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The microstructures of a thermally spray

The microstructures of a thermally sprayed and heat treated Al–20 wt.%Sn–3 wt.%Si alloy

✍ C.J. Kong; P.D. Brown; S.J. Harris; D.G. McCartney 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 832 KB

Analysis of microstructure formation in

Analysis of microstructure formation in gas-atomised Al–12 wt.% Sn–1 wt.% Cu alloy powder

✍ C.J. Kong; P.D. Brown; S.J. Harris; D.G. McCartney 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 942 KB

Performance of laser-glazed plasma-spray

Performance of laser-glazed plasma-sprayed (ZrO2-12wt.%Y2O3)/(Ni-22wt.%Cr-10wt.%Al-1wt.%Y) thermal barrier coatings in cyclic oxidation tests

✍ H.L. Tsai; P.C. Tsai 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 585 KB

Characterization of centrifugally atomiz

Characterization of centrifugally atomized Al-12Si-5Fe-3Cu-1Mg(wt%) alloy powder and extruded rod

✍ S. S. Cho; B. S. Chun; C. H. Won; B. S. Lee; H. K. Kim; B. J. Song; M. Ryu 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 903 KB

The Al-12Si-5Fe-3Cu-lMg(wt%) alloy was rapidly solidified by centrifugal atomization. The microstructural characteristics of rapidly solidified powder and the microstructure changes with heat treatment were investigated in terms and related to powder size. The microstructures of the powder consisted