## Abstract In this article, a novel design of a millimeter‐wave antenna array consisting of linearly tapered slotline antenna elements is presented. The antenna array was designed for the frequency range from 50 to 600 GHz. A numerical model of the antenna array was developed in CST microwave stud
Tapered slotline antenna modification for radiation pattern improving
✍ Scribed by E. García; E. De Lera; E. Rajo
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 394 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel structure of tapered slotline antenna is presented. Using “palm tree” shaped metallization cross‐polarization levels are improved. Also their influence on radiation pattern is considered. Matching performance is at least as good as a simple exponential tapered slotline (Vivaldi) antenna. Frequency coverage for return loss < −10 dB exceeded 5.5:1 (2.9–15 GHz) and measured gain reached values higher than 6 dB from 5 to 15 GHz. Radiation pattern is stable from 6 GHz to 12 GHz and cross‐polarization is below −20 dB for the 3–11 GHz band in the main direction. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 2590–2595, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22756
📜 SIMILAR VOLUMES
## Abstract An ultra‐wideband, dielectric‐immersed antenna has been developed for a breast tumor detection system. The antenna is a tapered slotline that operates in a low permittivity dielectric. The sensor is fed by an ultra‐wideband microstrip‐to‐slotline balun. Simulations of the balun and the
A simple and compact coplanar waveguide to slotline transition operating from 22 to 34 GHz is presented. It is designed for feeding tapered slot antennas (TSAs) and has a slightly larger than usual output slotline width, which helps either to shorten the length or improve the gain of the TSA.
## Abstract A novel radiation‐pattern control technique for an omnidirectional monopole antenna installed upside down on the ceiling in a building is presented. It is proposed that, by embedding a monopole antenna within a slotted metal cavity comprised of a top reflector, a cavity wall, and a slot