✦ LIBER ✦

Tailoring the texture of magnesium alloy by twinning deformation to improve the rolling capability

✍ Scribed by Yunchang Xin; Maoyin Wang; Zhen Zeng; Guangjie Huang; Qing Liu

Book ID: 113898935
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 771 KB
Volume: 64
Category: Article
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2011.02.010

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Improving the deformation capability of

Improving the deformation capability of sendust alloy by boron microalloying

✍ Joseph K.L. Lai; Shao Yuanzhi 📂 Article 📅 1995 🏛 Elsevier Science ⚖ 545 KB

Improving the Ductility Properties of Ha

Improving the Ductility Properties of Hard-to-Deform Hypereutectoid Silumin Alloys by Helical Rolling

✍ E.I. Panov 📂 Article 📅 2004 🏛 Springer US 🌐 English ⚖ 102 KB

Effect of mode of deformation by rolling

Effect of mode of deformation by rolling on the development of texture in binary Ti-Mn alloys

✍ A.K Singh; R.A Schwarzer 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 776 KB

Contribution of texture to the strengthe

Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12·7 at % cadmium alloy

✍ G. Sambasiva Rao; Y. V. R. K. Prasad 📂 Article 📅 1983 🏛 Springer 🌐 English ⚖ 847 KB

Pre-straining to improve the bake harden

Pre-straining to improve the bake hardening response of a twin-roll cast Al–Mg–Si alloy

✍ Yucel Birol 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 456 KB

The contributions of grain size, disloca

The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP

✍ Levente Balogh; Roberto B. Figueiredo; Tamás Ungár; Terence G. Langdon 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 434 KB

A ZK60 magnesium alloy was processed by equal-channel angular pressing (ECAP) for up to 8 passes at 473 K and the evolution of strength and microstructural parameters were determined using hardness testing and X-ray line profile analysis. The results show the subgrain size and twin boundary density