✦ LIBER ✦

Synthesis of ultra-high molecular weight poly(ethylene terephthalate) by swollen-state polymerization

✍ Scribed by Susumu Tate; Yhoichi Watanabe; Akira Chiba

Publisher: Elsevier Science
Year: 1993
Tongue: English
Weight: 586 KB
Volume: 34
Category: Article
ISSN: 0032-3861
DOI: 10.1016/0032-3861(93)90029-a

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Reaction rate enhancement during swollen

Reaction rate enhancement during swollen-state polymerization of poly(ethylene terephthalate)

✍ Manoj Kumar Parashar; Ravi Prakash Gupta; Anurag Jain; U. S. Agarwal 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 165 KB 👁 2 views

Experimental data are obtained for the extent of swelling and progress of the step-growth swollen-state polymerization (SwSP ) of polyethylene terephthalate (PET). The SwSP is carried out in biphenyl and diphenyl ether mixture (26 : 74 w/ w) solvent under appropriate conditions designed to understan

Thermal degradation and melt viscosity o

Thermal degradation and melt viscosity of ultra-high-molecular-weight poly(ethylene terephthalate)

✍ Susumu Tate; Haruhiko Narusawa 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 416 KB

Properties of high-speed spun high molec

Properties of high-speed spun high molecular weight poly(ethylene terephthalate) filaments

✍ Jung Yul Lim; Sang Yong Kim 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 186 KB 👁 3 views

High-speed spinning of high molecular weight poly(ethylene terephthalate) (PET) having an intrinsic viscosity of 0.98 dL/g was performed at the take-up velocity range of 2.5-5.5 km/min. The structure of the as-spun filaments was analyzed by density, birefringence, WAXS, DSC, boiling water shrinkage,

Surface modification of ultra-high-molec

Surface modification of ultra-high-molecular-weight polyethylene. II. Effect on the physicomechanical and tribological properties of ultra-high-molecular-weight polyethylene/poly(ethylene terephthalate) composites

✍ Mostafa Rezaei; Azadeh Shirzad; Nadereh Golshan Ebrahimi; Marianna Kontopoulou 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 426 KB 👁 2 views

Influence of molecular weight on the ord

Influence of molecular weight on the ordered state in poly(ethylene terephthalate)

✍ M. V. S. Rao; N. E. Dweltz 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 500 KB

WAXS, DSC, and IR methods have been employed to follow the crystallization of poly(ethy1ene terephthalate) as a function of molecular weight. The degree of order, which is a measure of the extent of crystallization, decreased with increasing molecular weight. The degree of reduction in the molecular

Solid state polymerization (SSP) of low

Solid state polymerization (SSP) of low molecular weight poly(ethylene terephthalate) (PET) copolyesters compared to conventional SSP of PET

✍ Robert J. Schiavone 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 127 KB