Three series of poly(aryl ether sulfone)s (PAESs) containing the phthalazinone moiety in the polymer backbone were synthesized by solution polycondensation of bis(4-chlorophenyl) sulfone with three commercial bisphenols and 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one. Bisphenol-A, hydroquinone, and bis
Synthesis and thermal properties of poly(arylene ether ketone)s containing phthalazinone moieties
β Scribed by Yuezhong Meng; Antisar R. Hlil; Allan S. Hay
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 148 KB
- Volume
- 37
- Category
- Article
- ISSN
- 0887-624X
No coin nor oath required. For personal study only.
β¦ Synopsis
A series of novel poly(arylene ether ketone)s were synthesized from the reaction of hydroquinone and 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one with 4,4Π-difluorobenzophenone in N-cyclohexylpyrrolidinone containing anhydrous potassium carbonate. The polymers exhibited high glass transition temperatures together with excellent thermooxidative stability. The chain structure of these polymers was studied by means of differential scanning calorimetry (DSC), wide-angle X-ray diffraction techniques (WAXD), and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS). The experimental results indicated that these "asmade" copoly(aryleneketone)s containing hydroquinone moieties exhibited a block chain structure with segments which mainly consisted of hydroquinone and 4,4Πdifluorobenzophenone. These chain segments resulted in crystallites in the polymers although they are thermodynamically unstable. The polymers showed thermal properties comparable to commercial PEEK, but the conditions for synthesis are much milder. The glass transition temperatures and solubilities of the copoly(arylene ketone)s tended to increase with increasing phthalazinone moiety content, while the crystallite melting points and crystallinity appeared to decrease.
π SIMILAR VOLUMES
In this work we present the results from studies on novel poly(arylene ether ketone)s, including gas permeability, wide-angle x-ray diffraction (WAXD), and dynamic mechanical analysis (DMA). Poly(arylene ether ketone)s containing 2,2and 3,3 -dibenzoylbiphenyl (DBBP) moieties were characterized to st
A series of new high molecular weight poly(arylene ether)s containing the 1,2-dihydro-4-phenyl(2H)phthalazinone moiety have been synthesized. The inherent viscosities of these polymers are in the range of 0.33-0.64 dL/g. They are amorphous and readily soluble in chloroform, DMF, and DMAc. The glass
## Synthese und thermische Eigenschaften von Polyaryleninetallsulfiden Neue thermostabilc Polymere der allgemeinen Forrnel [-Ar-X-Ar-S-Me-S-] mit X = 0, S oder direkter C-C-Bindung und Me = Pb oder Cd wurden dargestellt. Ihre Eigenschaften sowie ihr thermischer Abbau uiiter Inertbedingungel] und i
The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single gla