Synthesis and study of the oligo(ether–ester)s based on butylene oxide
✍ Scribed by Gulnare Ahmetli; Ahmet Kocak; Ulku Soydal
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 191 KB
- Volume
- 110
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Unsaturated oligo(ether–ester) was prepared by ring‐opening polymerization of butylene oxide (BO) with glycidyl methacrylate (GMA) in the presence of cationic catalyst BF~3~^•^O(C~2~H~5~)~2~. The effects of mol ratio of the initial components, amount of catalyst, temperature, and reaction times on the copolymerization reaction were examined. Oligo(ether–ester) were achieved in highest yield of 82% after reaction times of 4 h at 0°C. Synthesized copolymer was characterized using spectroscopic (^1^H NMR and IR) and chemical analysis methods. The thermal degradation and softing points of oligo(ether–ester)‐styrene composites were studied. It is shown that crosslinking of the unsaturated oligo(ether–ester) with styrene takes place through the use of thermostable materials. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.
📜 SIMILAR VOLUMES
The torsional behavior of poly(ether ester) (PEE) thermoplastic elastomer, based on poly(ethylene glycol) (PEG) and poly(butylene terephthalate) (PBT) was studied and compared with that of PBT itself. Two types of experiments were performed: (1) stress relaxation in torsion, and (2) measurement of
The crystallization behavior of a series of ethylene oxide-butylene terephthalate (EOBT) segmented copolymers with different soft segment molecular weight and hard segment weight content were examined by differential scanning calorimeter (DSC) and polarized microscope. Combined with the comparison w
## Abstract Various segmented block copolyetheramides based on nylon6 (N6) and poly(ethylene oxide) (PEO) with different compositions and block length of the hard and soft segments were synthesized. The effect of composition of the hard and soft segments was studied via FTIR spectroscopy based on t