New dianhydrides containing t-butyl and phenyl pendant groups have been synthesized and used as monomers, together with commercial diamines, to prepare novel polyimides. The influence of the chemical structure of the monomers on their reactivity has been studied by quantum semiempirical methods. The
Synthesis and Properties of Novel Polyimides Bearing Sulfonated Benzimidazole Pendant Groups
✍ Scribed by Yolanda Álvarez-Gallego; Suzana Pereira Nunes; Angel E. Lozano; José G. de la Campa; Javier de Abajo
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 212 KB
- Volume
- 28
- Category
- Article
- ISSN
- 1022-1336
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A new diamine monomer containing benzimidazole‐5‐sulfonic acid has been synthesised. It has been reacted, alone or mixed with diaminodiphenyl ether, with naphthalenic dianhydride to attain polynaphthalimides in which the sulfonic acid functionality is borne by pendant benzimidazole groups. The presence of sulfonic and benzimidazole groups greatly affected the physical properties of the polyimides as the novel polymers were found to be soluble in polar organic solvents and exhibited a lower thermal resistance than their non‐sulfonated counterparts. The polymer films exhibited good mechanical properties with tensile strength in the range 100–120 MPa and with moduli in the range 2.2–3.1 GPa. Sulfonic and benzimidazole groups significantly enhanced the hydrophilicity of the copolyimides, which showed water uptake up to 39%.
magnified image
📜 SIMILAR VOLUMES
Polyimides derived from a new dianhydride with p-nitrophenyl pendant groups have been synthesized and their properties compared with those of a reference series, without side groups. The polymers were obtained by combination of the novel monomer with aromatic diamines, in a two-step procedure that i
## Abstract Two series of aromatic polyimides containing various‐sized alkyl side groups were synthesized by thermal imidization of the poly(amic acid)s prepared from the polyaddition of benzophenonetetracarboxylic dianhydride and hexafluoro‐isopropylidene bis(phthalic anhydride) with 4,4′‐methylen