✦ LIBER ✦

Synthesis and mechanical properties of nickel-titania composite coatings

✍ Scribed by S. A. Lajevardi; T. Shahrabi; V. Hasannaeimi

Publisher: John Wiley and Sons
Year: 2010
Tongue: German
Weight: 594 KB
Volume: 62
Category: Article
ISSN: 0947-5117
DOI: 10.1002/maco.200905467

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Nickel‐titania composite coatings were prepared under direct current conditions by codeposition of nano titania particles (21 nm) and nickel from a nickel Watts type bath. Current density, concentration of titania particles, effect of agitation, and ultrasonic waves were investigated and the optimum values of these parameters for reaching to maximum vol% of titania particles in the coating were determined. Microhardness of these coatings was investigated by Vickers method and their morphological properties and chemical composition were studied by SEM and EDS analysis, respectively. The results showed that optimal values of current density, concentration of particles, and agitation rate exist that maximum percent of particles codeposited in the coating. Also it is demonstrated that using the ultrasonic waves dramatically decrease the agglomeration of particles in the coating.

📜 SIMILAR VOLUMES

Thermal and mechanical properties of ara

Thermal and mechanical properties of aramid-based titania hybrid composites

✍ Z. Ahmad; M. I. Sarwar; J. E. Mark 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 121 KB 👁 2 views

The sol-gel process has been used to prepare various types of aramid-titania hybrid materials. Specifically, a mixture of m-and p-phenylenediamines was reacted with terephthaloyl chloride to produce linear polyamide chains in a dimethylacetamide solvent. Various proportions of tetrapropylorthotitana

Mechanical Properties of TiN Coatings

✍ R. Wiedemann; H. Oettel; T. Bertram; V. Weihnacht 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 358 KB

Chemical, Mechanical, and Antibacterial

Chemical, Mechanical, and Antibacterial Properties of Silver Nanocluster–Silica Composite Coatings Obtained by Sputtering

✍ Monica Ferraris; Sergio Perero; Marta Miola; Sara Ferraris; Giovanna Gautier; Gi 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 680 KB

Synthesis and Catalytic Properties of Ni

Synthesis and Catalytic Properties of Nickel—Silica Composite Hollow Nanospheres.

✍ Pu Jin; Qianwang Chen; Liqing Hao; Ruifen Tian; Lixin Zhang; Lin Wang 📂 Article 📅 2004 🏛 John Wiley and Sons ⚖ 63 KB

Hydroxyapatite and titania sol-gel compo

Hydroxyapatite and titania sol-gel composite coatings on titanium for hard tissue implants; Mechanical andin vitro biological performance

✍ Kim, Hae-Won ;Kim, Hyoun-Ee ;Salih, Vehid ;Knowles, Jonathan C. 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 602 KB

## Abstract Hydroxyapatite (HA) composites with titania (TiO~2~) up to 30 mol % were coated on a titanium (Ti) substrate by a sol–gel route, and the mechanical and biological properties of the coating systems were evaluated. Using polymeric precursors, highly stable HA and TiO~2~ sols were prepared

A tribological study of electrolytic nic

A tribological study of electrolytic nickel-PTFE composite coatings

✍ Assoul, M. ;Pena-Munoz, E. ;Roizard, X. 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 402 KB