𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Synthesis and characterization of new functional poly(urethane-imide) crosslinked networks

✍ Scribed by Mi-Hee Park; Wonbong Jang; Seung-Jin Yang; Yonggun Shul; Haksoo Han


Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
196 KB
Volume
100
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

To synthesize new functional poly(urethane‐imide) crosslinked networks, soluble polyimide from 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride, 4,4′‐oxydianiline, and maleic anhydride and polyurethane prepolymer from polycaprolactone diol, tolylene 2,4‐diisocyanate and hydroxyl ethyl acrylate were prepared. Poly(urethane‐imide) thin films were finally prepared by the reaction between maleimide end‐capped soluble polyimide (PI) and acrylate end‐capped polyurethane (PU). The effect of polyurethane content on dielectric constant, residual stress, morphology, thermal property, and mechanical property was studied by FTIR, prism coupler, Thin Film Stress Analyzer (TFSA), XRD, TGA, DMTA, and Nano‐indentation. Dielectric constant of poly(urethane‐imide) thin films (2.39–2.45) was lower than that of pure polyimide (2.46). Especially, poly(urethane‐imide) thin films with 50% of PU showed lower dielectric constant than other poly(urethane‐imide) thin films did. Lower residual stress and slope in cooling curve were achieved in higher PU content. Compared to typical polyurethane, poly(urethane‐imide) thin films exhibited better thermal stability due to the presence of the imide groups. The glass transition temperature, modulus, and hardness decreased with increase in the flexible PU content even though elongation and thermal expansion coefficient increased. Finally, poly(urethane‐imide) thin films with low residual stress and dielectric constant, which are strongly affected by the morphological structure, chain mobility, and modulus, can be suggested to apply for electronic devices by variation of PU. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 113–123, 2006


📜 SIMILAR VOLUMES


Synthesis and characterization of block
✍ Jong-Young Jeon; Tae-Moon Tak 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 426 KB 👁 2 views

A newly synthetic method has been developed for the preparation of block copoly(urethaneimide) (PUI). The copolymer was yielded from the direct reaction of the prepolyurethane terminated with isocyanate and the prepolyimide terminated with anhydride. The latter is prepared by reacting an excess amou

Synthesis and properties of poly(amide-i
✍ Wang, Tzong-Liu; Huang, Fang-Jung 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 194 KB 👁 2 views

A new class of poly(amide-imide-urethane) thermoplastic elastomers based on two-step synthesis of 4,4@-methylene bis(4-phenylisocyanate) with di †erent polyols (PPG and PTMG) and trimellitic anhydride was synthesized. Both resulting polymers showed semicrystalline structures and were readily soluble

Synthesis and characterization of castor
✍ C. Saikumar; S. Rajadurai 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 270 KB 👁 2 views

Castor oil was polymerized with diisocyanate and crosslinked with primary triamine (Jeffamine T-403) to form networks. The effect of triamine as a crosslinking agent on rubbery castor oil urethane elastomer was determined by measuring network parameters such as average molecular weight between cross

Synthesis and characterization of new fl
✍ Sheng-Huei Hsiao; Chin-Tang Li 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 219 KB 👁 2 views

A novel bis(ether anhydride) monomer, 9,9-bis [4-(3,4-dicarboxyphenoxy)phenyl]fluorene dianhydride (4), was synthesized from the nitrodisplacement of 4-nitrophthalonitrile by the bisphenoxide ion of 9,9-bis(4-hydroxyphenyl)fluorene (1), followed by alkaline hydrolysis of the intermediate tetranitril