𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Synthesis and characterization of calcium phosphate coatings on Nitinol

✍ Scribed by Katić, Jozefina; Metikoš-Huković, Mirjana; Babić, Ranko


Book ID
121580379
Publisher
Springer
Year
2013
Tongue
English
Weight
605 KB
Volume
44
Category
Article
ISSN
0021-891X

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Thin Calcium Phosphate Coatings for Medi
✍ León, Betty; Jansen, John 📂 Article 📅 2008 🏛 Springer New York 🌐 English ⚖ 934 KB

Calcium phosphate coatings ( 50 mm thick), especially those made with hyd- xyapatite (HA), produced by the plasma-spraying process have been succe- fully used on orthopedic and dental implants to improve fixation of these implants in bone. Thin calcium phosphate coatings ( 10mm thick) formed by vari

Thin Calcium Phosphate Coatings for Medi
✍ León, Betty; Jansen, John 📂 Article 📅 2008 🏛 Springer New York 🌐 English ⚖ 934 KB

Calcium phosphate coatings ( 50 mm thick), especially those made with hyd- xyapatite (HA), produced by the plasma-spraying process have been succe- fully used on orthopedic and dental implants to improve fixation of these implants in bone. Thin calcium phosphate coatings ( 10mm thick) formed by vari

Vibrational spectroscopic characterizati
✍ Paola Taddei; Anna Tinti; Giorgio Bottura; Alessandro Bertoluzza 📂 Article 📅 2000 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 194 KB

In this work calcium phosphate (CaP) compounds with different PO 4 3Ϫ / HPO 4 2Ϫ R molar ratios in the 0.65-149 range were synthesized. In fact, all these CaPs contain different amounts of HPO 4 2Ϫ and PO 4 3Ϫ ions as well as the amorphous precursors (tricalcium phosphate and octacalcium phosphate)

Synthesis and characterization of machin
✍ Celaletdin Ergun 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 980 KB

Hydroxylapatite (HA) and tricalcium phosphate (TCP) composites with lanthanum phosphate were prepared with pressureless air sintering at 500, 700, 900, 1100 and 1300 • C for 2 h. The composites were characterized in terms of phase stability during sintering, microstructural evaluation with XRD, SEM