## Abstract High‐density polyethylene (HDPE) sample tanks manufactured by using a rotational molding process were used in a study to determine the presence and characteristics of antioxidants at the inside and outside surfaces of the tanks. The sample tanks were manufactured by using three differen
Synergism of antioxidants in high density polyethylene
✍ Scribed by Alfonso J. Chirinos-Padrón; Petra H. Hernández; Norman S. Allen; Constantine Vasilion; G.P. Marshall; Michell de Poortere
- Publisher
- Elsevier Science
- Year
- 1987
- Tongue
- English
- Weight
- 544 KB
- Volume
- 19
- Category
- Article
- ISSN
- 0141-3910
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
The crystallization studies revealed that the high-density polyethylene (HDPE) and linear low-density polyethylene (LLDPE) formed strong cocrystalline mass when they were melt blended in a single screw extruder. The progress of crystallization was observed through a small-angle light scattering inst
Necking draw of high-density polyethylene is studied a t draw rates of 2.5 x 10-2 to 25 mm/min and at temperatures of -40' to 8OOC. Effect of temperature and draw rate on necking stress is interpreted in terms of viscoelastic flow of amorphous phase accompanying orientation of crystallites. It is pr