✦ LIBER ✦

Surface modification of Ti6Al4V surgical alloy by plasma source ion implantation

✍ Scribed by A. Chen; K. Sridharan; J.R. Conrad; R.P. Fetherston

Publisher: Elsevier Science
Year: 1991
Tongue: English
Weight: 416 KB
Volume: 50
Category: Article
ISSN: 0257-8972
DOI: 10.1016/0257-8972(91)90184-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Ion implantation of surgical Ti6Al4V a

Ion implantation of surgical Ti6Al4V alloy

✍ J.M. Williams; R.A. Buchanan 📂 Article 📅 1985 🏛 Elsevier Science ⚖ 849 KB

Plasma nitriding of Ti6Al4V alloy to i

Plasma nitriding of Ti6Al4V alloy to improve some tribological properties

✍ Bekir S. Yilbaş; Ahmet Z. Şahin; Ahmed Z. Al-Garni; Syed A.M. Said; Zaki Ahmed; 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 514 KB

The effect of ion plating on the frictio

The effect of ion plating on the friction and wear of Ti6Al4V alloy

✍ D Eylon; R.K Betts; S Fujishiro 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 523 KB

Porous Ti-6Al-4V alloy fabricated by spa

Porous Ti-6Al-4V alloy fabricated by spark plasma sintering for biomimetic surface modification

✍ Kon, Masayuki ;Hirakata, Luciana M. ;Asaoka, Kenzo 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 325 KB

## Abstract Porous compacts with both biological and biomechanical compatibilities and high strength were developed. Spherical powders of Ti‐6Al‐4V alloy, which were either as received or surface modified with the use of calcium ions by hydrothermal treatment (HTT), were fabricated by a spark plasm

Surface modification of Ti-6Al-4V alloy

Surface modification of Ti-6Al-4V alloy by salt cyaniding and nitriding

✍ F.D. Lai; T.I. Wu; J.K. Wu 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 208 KB

Improvement of Corrosion-Wear Resistance

Improvement of Corrosion-Wear Resistance of Ti-6Al-4V Alloy by Plasma Mo-N Surface Modification

✍ B. Tang; P.-Q. Wu; A.-L. Fan; L. Qin; H.-J. Hu; J.-P. Celis 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 282 KB 👁 2 views

Ti‐6Al‐4V alloy has attracted increasing applications as a metallic biomaterial in recent years thanks to its good corrosion resistance and biocompatibility. However, the poor corrosion‐wear resistance of the alloy is thus a major concern to potential users. In this paper, the electrochemical noise