## Abstract The rf power was modulated (discharge onβtime of 10 ΞΌs and discharge offβtime of 50β500 ΞΌs), for pulsed argon (Ar) and oxygen (O~2~) plasmas used to irradiate PET film surfaces to modify the film surfaces. From data regarding the contact angle for the modified PET film surfaces and chem
Surface modification of polyester films by RF plasma
β Scribed by B. Gupta; J. Hilborn; Ch. Hollenstein; C. J. G. Plummer; R. Houriet; N. Xanthopoulos
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 245 KB
- Volume
- 78
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Surface modification of poly(p-phenylene terephthalamide) (PPTA) film by a remote oxygen plasma treatment has been investigated from a viewpoint of comparison with a direct oxygen plasma treatment. We call the modification procedure in a space far away from the oxygen plasma zone ''the remote oxygen
Poly(tetrafluoroethylene) (PTFE) surface was modified by the graft polymerization of sodium vinylsulfonate, and the chemical composition of the graft-polymerized PTFE surface was analyzed by X-ray photoelectron spectroscopy. Peroxides were formed on the PTFE surface by a combination procedure of arg
Radio frequency (r.f.) plasma polymerization of vinylidene fluoride (CH 2 |CF 2 ) has been used to modify the surface properties of chlorobutyl rubber. FTIR-ATR spectra of the treated rubbers and transmission spectra of plasma polymer films on NaCl windows indicated that as power increased the F/H r
Surface modification of poly(aryl ether ether ketone) (PEEK) film surfaces by oxygen plasma treatment was investigated. Two procedures, the direct plasma treatment and the remote oxygen plasma treatment, were used as oxygen plasma treatments, and the efficiency of the hydrophilic modification was di