✦ LIBER ✦

Surface modification of PBO fibers by argon plasma and argon plasma combined with coupling agents

✍ Scribed by Dandan Liu; Jian Hu; Yaoming Zhao; Xuesong Zhou; Ping Ning; Yi Wang

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 373 KB
Volume: 102
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.24287

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Surface modification of PET films by pul

Surface modification of PET films by pulsed argon plasma

✍ N. Inagaki; S. Tasaka; K. Narushima; H. Kobayashi 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 134 KB 👁 2 views

## Abstract The rf power was modulated (discharge on‐time of 10 μs and discharge off‐time of 50–500 μs), for pulsed argon (Ar) and oxygen (O~2~) plasmas used to irradiate PET film surfaces to modify the film surfaces. From data regarding the contact angle for the modified PET film surfaces and chem

Surface modification of polyimide films

Surface modification of polyimide films by argon plasma for copper metallization on microelectronic flex substrates

✍ Yung-Sen Lin; Huang-Ming Liu; Hsuan-Ta Chen 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 425 KB 👁 2 views

## Abstract Surface modification of polyimide films such as Kapton E(N) and Upilex S by argon plasma was investigated because of the enhanced adhesive strength with sputtered copper. Peel tests demonstrated this improvement, with a peel strength of 0.7 and 1.2 g/mm for unmodified Kapton E(N) and Up