✦ LIBER ✦

Surface modification of NiTi alloy with tantalum to improve its biocompatibility and radiopacity

✍ Scribed by Y. Cheng; W. Cai; H. T. Li; Y. F. Zheng

Publisher: Springer
Year: 2006
Tongue: English
Weight: 251 KB
Volume: 41
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-006-0096-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

New oxidation treatment of NiTi shape me

New oxidation treatment of NiTi shape memory alloys to obtain Ni-free surfaces and to improve biocompatibility

✍ A. Michiardi; C. Aparicio; J.A. Planell; F.J. Gil 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 261 KB

## Abstract Various oxidation treatments were applied to nearly equiatomic NiTi alloys so as to form a Ni‐free protective oxide on the surface. Sample surfaces were analyzed by X‐ray Photoelectron Spectroscopy, and NiTi transformation temperatures were determined by differential scanning calorimetr

Modification of cellulose acetate fabric

Modification of cellulose acetate fabric with cyclodextrin to improve its dyeability

✍ W. M. Raslan; A. T. El-Aref; A. Bendak 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 411 KB 👁 2 views

Modification of high ortho novolac resin

Modification of high ortho novolac resin with diacids to improve its mechanical properties

✍ Tülin Banu İyim 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 176 KB 👁 2 views

## Abstract To improve the brittleness of high ortho novolac resins, at first, high ortho novolac resins (N) were synthesized and condensation reactions between N and flexible diacids such as adipic acid (DA4) and azelaic acid (DA7) were carried out with different amounts of diacids, in the presenc

Surface modification of poly(l-lactic ac

Surface modification of poly(l-lactic acid) to improve its cytocompatibility via assembly of polyelectrolytes and gelatin

✍ Yuan Lin; Luling Wang; Peibiao Zhang; Xin Wang; Xuesi Chen; Xiabin Jing; Zhaohui 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 439 KB

Poly(L-lactide) (PLLA) surface was modified via aminolysis by poly(allylamine hydrochloride) (PAH) at high pH and subsequent electrostatic self-assembly of poly(sodium styrenesulfonate) (PSS) and PAH, and the process was monitored by X-ray photoelectron spectroscopy (XPS) and contact angle measureme

Complementary reinforcement and surface

Complementary reinforcement and surface modification of GRC with resin systems to improve strength, chemical resistance and surface finish

✍ I.R.K. Greig 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 268 KB

Part one of the paper describes the use of pultruded fibre composite rods as an alternative to steel for the secondary reinforcement of GRC. Part two is concerned with the development of polyurethane and epoxy gel-coats to produce GRC with chemically resistant and high quality surfaces.

Surface modification of polyethersulfone

Surface modification of polyethersulfone membrane to improve its hydrophobic characteristics for waste frying oil filtration: Radio frequency plasma treatment

✍ Eren Tur; Baran Onal-Ulusoy; Ebru Akdogan; Mehmet Mutlu 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 448 KB 👁 1 views

## Abstract In this study, polyethersulfone (PES) membrane was subjected to surface modification using hexamethyldisiloxane (HMDSO) and 1,1,1,3,3,3‐hexafluoro‐2‐propanol **(**HFIP) in radio frequency (RF) plasma system to improve its hydrophobic property for recovery of waste frying oil. Structural