✦ LIBER ✦

Surface metallurgical and tribological characteristics of TiN-coated bearing steels

✍ Scribed by A. Erdemir; R.F. Hochman

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 678 KB
Volume: 36
Category: Article
ISSN: 0257-8972
DOI: 10.1016/0257-8972(88)90015-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Bio-inspired surface engineering and tri

Bio-inspired surface engineering and tribology of MoS2 overcoated cBN–TiN composite coating

✍ J.-H. Wu; B.S. Phillips; Wenping Jiang; J.H. Sanders; J.S. Zabinski; A.P. Malshe 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 800 KB

A hybrid deposition technique, i.e., electrostatic spray coating (ESC) followed by chemical vapor infiltration (CVI), was used to synthesize cubic boron nitride and titanium nitride (cBN-TiN) hard composite coatings. The as-prepared coatings have a surface texture similar to that of lotus leaf. The

Coating thickness and surface roughness

Coating thickness and surface roughness of TiN-coated high speed steel in relation to coating functionality

✍ K. De Bruyn; J.P. Celis; J.R. Roos; L.M. Stals; M. Van Stappen 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 364 KB

Corrosion and tribological properties an

Corrosion and tribological properties and impact fatigue behaviors of TiN- and DLC-coated stainless steels in a simulated body fluid environment

✍ L. Wang; J.F. Su; X. Nie 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 541 KB

Interaction of fomblin® lubricant with s

Interaction of fomblin® lubricant with surface nitrided and/or coated bearing (M50) steel

✍ A. K. Rai; J. Nainaparampil; M. Massey; R. S. Bhattacharya; L. J. Gschwender; C. 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 449 KB

## Abstract High‐temperature perfluoropolalkylether lubricants including Fomblin^®^ are susceptible to degradation and cause corrosion in the presence of ferrous metals such as M50 bearing steel. This paper describes the effect of surface treatment (nitriding), coating chemistry and architecture in

Properties and characteristics of advanc

Properties and characteristics of advanced tribological surface coatings and the assessment of quality-for-performance for enhanced manufacturing efficiency

✍ K.N. Strafford; C. Subramanian; T.P. Wilks 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 882 KB

Improvement of the slurry erosion resist

Improvement of the slurry erosion resistance of an austenitic stainless steel with combinations of surface treatments: Nitriding and TiN coating

✍ Abel André C. Recco; Diana López; André F. Bevilacqua; Felipe da Silva; André P. 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 930 KB

The combination of different surface treatments for improving the erosion resistance of an AISI 304 stainless steel was studied. Six kinds of sample conditions were tested in a slurry composed of distilled water and SiC particles: High temperature gas nitriding (HTGN), low temperature plasma nitridi