✦ LIBER ✦

Success and prospects for low energy, self-shielded electron beam accelerators

✍ Scribed by UrsV. L:auppi

Book ID: 108046064
Publisher: Elsevier Science
Year: 1988
Weight: 135 KB
Volume: 31
Category: Article
ISSN: 1359-0197
DOI: 10.1016/1359-0197(88)90152-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The steering and manipulation of ion bea

The steering and manipulation of ion beams for low-energy heavy ion accelerators

✍ D.G. Beanland; J.H. Freeman 📂 Article 📅 1976 🏛 Elsevier Science ⚖ 745 KB

Electron gun for producing a low energy,

Electron gun for producing a low energy, high current, and uniform flux electron beam

✍ Lin, Jong-Liang 📂 Article 📅 1994 🏛 AVS (American Vacuum Society) 🌐 English ⚖ 411 KB

The high-energy inverse bremsstrahlung p

The high-energy inverse bremsstrahlung process and self-acceleration of high-density electron beams crossing a target

✍ G. Diambrini-Palazzi 📂 Article 📅 1975 🏛 Elsevier Science 🌐 English ⚖ 204 KB

Neutron energy and time-of-flight spectr

Neutron energy and time-of-flight spectra behind the lateral shield of a high energy electron accelerator beam dump. Part II: Monte Carlo simulations

✍ S. Roesler; J.C. Liu; S.H. Rokni; S. Taniguchi 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 438 KB

A pepper-pot emittance meter for low-ene

A pepper-pot emittance meter for low-energy and high-current electron beams

✍ Angelo Vignati; Fernando Sannibale 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 259 KB

A calorimeter for measuring energy depos

A calorimeter for measuring energy deposition in materials and calibrating the response of dosimeters irradiated by low-energy industrial electron accelerators

✍ Igor Janovský; Arne Miller 📂 Article 📅 1987 🏛 Elsevier Science ⚖ 563 KB

A simple calorimeter with a totally-absorbing graphite body was designed and tested at a 400-keV electron accelerator. For a given conveyor speed and beam current, the calorimetric measurements are expressed as a quantity F (J 'cm-')-the absorbed energy per unit surface area-which is found to be in