✦ LIBER ✦

Subsurface deformation in dry sliding of hypo-eutectic Al-Si alloys

✍ Scribed by B. N. Pramila Bai; S. K. Biswas

Publisher: Springer
Year: 1984
Tongue: English
Weight: 308 KB
Volume: 19
Category: Article
ISSN: 0022-2461
DOI: 10.1007/bf00552270

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Subsurface damage in dry wear of Al-Si a

Subsurface damage in dry wear of Al-Si alloys

✍ B.N.Pramila Bai; E.S. Dwarakadasa; S.K. Biswas 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 388 KB

Characterization of dry sliding wear of

Characterization of dry sliding wear of AlSi alloys

✍ B.N.Pramila Bai; S.K. Biswas 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 766 KB

Debris analysis in dry sliding wear of A

Debris analysis in dry sliding wear of AlSi alloys

✍ B.N. Pramila Bai; H.S. Shamasunder; S.K. Biswas 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 1012 KB

Dry sliding wear in binary Al-Si alloys

Dry sliding wear in binary Al-Si alloys at low bearing pressures

✍ K. Mohammed Jasim; E. S. Dwarakadasa 📂 Article 📅 1992 🏛 Springer 🌐 English ⚖ 263 KB

Formation of a separated eutectic in Al-

Formation of a separated eutectic in Al-Si eutectic alloy

✍ Ren Zhongming; Jin Jinze 📂 Article 📅 1992 🏛 Springer 🌐 English ⚖ 968 KB

Effect of Si content on the dry sliding

Effect of Si content on the dry sliding wear properties of spray-deposited Al–Si alloy

✍ Feng Wang; Huimin Liu; Yajun Ma; Yuansheng Jin 📂 Article 📅 2004 🏛 Elsevier Science ⚖ 585 KB

In the present investigation, Al-12Si, Al-20Si and Al-25Si (wt%) alloys were synthesized by spray atomization and deposition technique. The wear resistance of the alloys was studied using a pin-on-disc machine under four loads, namely 8.9, 17.8, 26.7 and 35.6 N. The microstructures, worn surfaces an