✦ LIBER ✦

Substrate roughness and thickness effects on cold spray nanocrystalline Al−Mg coatings

✍ Scribed by P. Richer; B. Jodoin; L. Ajdelsztajn

Book ID: 111787051
Publisher: Springer US
Year: 2006
Tongue: English
Weight: 495 KB
Volume: 15
Category: Article
ISSN: 1059-9630
DOI: 10.1361/105996306x108174

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Interfacial microstructure of cold gas s

Interfacial microstructure of cold gas spraying coated Al and Mg alloy substrates

✍ Wielage, Bernhard ;Podlesak, Harry ;Grund, Thomas ;Wank, Andreas 📂 Article 📅 2006 🏛 Springer-Verlag ⚖ 186 KB

Effect of Substrate Preheating on Bondin

Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings

✍ X. K. Suo, M. Yu, W. Y. Li, M. P. Planche, H. L. Liao 📂 Article 📅 2012 🏛 Springer US 🌐 English ⚖ 909 KB

The effect of substrate roughness and hy

The effect of substrate roughness and hydroxyapatite coating thickness on implant shear strength

✍ M. Svehla; P. Morberg; W. Bruce; B. Zicat; W.R. Walsh 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 292 KB

Effect of Substrate Temperature on the F

Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings

✍ J. G. Legoux; E. Irissou; C. Moreau 📂 Article 📅 2007 🏛 Springer US 🌐 English ⚖ 650 KB

Effect of spraying power on microstructu

Effect of spraying power on microstructure and properties of supersonic plasma sprayed Al2O3 coating on porous Si3N4 substrate

✍ Wang, Chao; Fan, Lei; Fan, Jinpeng; Zhang, Dahai; Wang, Hongjie 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 936 KB

Effect of grinding on plain fatigue and

Effect of grinding on plain fatigue and fretting fatigue behaviour of detonation gun sprayed Cu–Ni–In coating on Al–Mg–Si alloy

✍ B. Rajasekaran; S. Ganesh Sundara Raman; S.V. Joshi; G. Sundararajan 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 846 KB

Uniaxial plain fatigue and fretting fatigue tests were carried out on detonation gun sprayed Cu-Ni-In coating on Al-Mg-Si alloy samples. The samples in three conditions were considered: uncoated, ascoated and ground after coating. Ground coated specimens exhibited superior plain fatigue and fretting