𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Substrate heating effect on the growth of a CdTe film on an InSb substrate by vacuum evaporation

✍ Scribed by Jiann-Ruey Chen; Mau-Phon Houng; Fenq-Lin Jenq; Chien-Shyong Fang; Wan-Sun Tse

Publisher
Elsevier Science
Year
1991
Weight
68 KB
Volume
251-252
Category
Article
ISSN
0167-2584

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of current flow direction on the
Effect of current flow direction on the heteroepitaxial growth of InSb films on Ge/Si(001) substrate heated by direct current
✍ M Mori; Y Nizawa; Y Nishi; K Mae; T Tambo; C Tatsuyama πŸ“‚ Article πŸ“… 2000 πŸ› Elsevier Science 🌐 English βš– 943 KB

Germanium is a suitable material as the buffer layer for the heteroepitaxial growth of InSb films on a Si 001 substrate. It reduces the large lattice mismatch of about 19.3% between Si and InSb to about 14.5%. InSb films grown on the islanded Ε½ . Β² : Ge buffer layers on a Si 001 substrate at elevat

Effect of substrate temperature on the p
Effect of substrate temperature on the properties of vacuum evaporated indium selenide thin films
✍ C. Viswanathan; V. Senthilkumar; R. Sriranjini; D. Mangalaraj; Sa. K. Narayandas πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 236 KB πŸ‘ 3 views

Thin films of InSe were obtained by thermal evaporation techniques on glass substrates maintained at various temperatures (T sb = 30Β°, 400Β°C). X-ray diffraction analysis showed the occurrence of amorphous to polycrystalline transformation in the films deposited at higher substrate temperature (400Β°C

Effects of CdCl2 treatment on properties
Effects of CdCl2 treatment on properties of CdTe thin films grown by evaporation at low substrate temperatures
✍ E. Bacaksiz; M. Altunbaş; S. YΔ±lmaz; M. Tomakin; M. Parlak πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 216 KB πŸ‘ 1 views

The structural, morphological and optical properties of vacuum-evaporated CdTe thin films were investigated as a function of substrate temperature and post-deposition annealing without and with CdCl 2 /treatment at 400Β°C for 30 min. Diffraction patterns are almost the same exhibiting higher preferen