𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Subcutaneous implants of polypropylene filaments

✍ Scribed by Liebert, Timothy C. ;Chartoff, Richard P. ;Cosgrove, Stanley L. ;McCuskey, Robert S.


Book ID
102872876
Publisher
John Wiley and Sons
Year
1976
Tongue
English
Weight
619 KB
Volume
10
Category
Article
ISSN
0021-9304

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Exturded filaments of unmodified polypropylene (PP) with and without antioxidant were implanted subcutaneously in hamsters in order to determine their rate of degradation. Specimens were removed periodically during a 5 month test period and analyzed by infrared spectroscopy and dynamic mechanical testing. The analyses show that degradation begins to occur after only a few days. Although the reaction sequence is not known, several factors suggest that the in vivo degradation process is similar to autoxidation which occurs in air or oxygen.

The infrared data indicate that the hydroxyl content of the implants increases at a rate of 0.061 mg/g polypropylene per day during the initiation phase of the reaction. An induction time of 108 days was established. Carbonyl bonds appear after an implantation time of 50–90 days and increase thereafter. Mechanical tests indicate a decrease in the dynamic loss tangent, tan Ξ΄, during the first month of implantation for unmodified polypropylene. No change in the infrared spectra or tan Ξ΄ was observed, however, for implants containing an antioxidant.

Thus, it is apparent that polypropylene filaments implanted subcutaneously in hamsters degrade by an oxidation process which is retarded effectively by using an antioxidant. While the findings reported are specific to subcutaneous polypropylene implants, they suggest that degradation of other systems may involve similar processes. This notion suggests directions for further research on increasing the in vivo stability of synthetic polymers.

Long‐term effects of polymer implantation upon tissue were not studied in this work.


πŸ“œ SIMILAR VOLUMES


Morphological studies on extruded films
✍ R. Janarthanan; S. N. Garg; A. Misra πŸ“‚ Article πŸ“… 1994 πŸ› John Wiley and Sons 🌐 English βš– 572 KB

In the present work, an attempt has been made to study the development of morphology during extrusion and.uniaxia1 stretching of polypropylene (PP) films and filaments at corresponding conditions. Dies for extrusion of films and filaments were designed to achieve similar extrusion velocity and shear